WARNING: Exposure to UV light could burn
the skin and can cause severe and permanent eye damage by burning
the retina. Do not look directly at the UV light.
WARNING: Before replacing the UV lamp, make
sure the power source is disconnected or turned OFF.
NOTE: Do Not touch the glass portion of the germicidal UV lamp with
bare hands. Use cotton gloves to avoid skin oils that will harm the
UV lamp.
NOTE: It is. highly recommends that a qualified
technician performs the germicidal UV lamp replacement. These are
the guidelines:
- Remove
the protective outer cover of the UV lamp housing.
|
- Locate
and loosen the adjustable coupling nut that holds the UV
lamp.
|
- Gently
pull the ultraviolet lamp and the electrical connection
from the coupling, until they can be easily disconnected.
|
- Disconnect
and gently remove the UV lamp.
|
- Using
gloves, replace the UV lamp into the coupling. Reconnect
electrical connection and gently tighten. NOTE: Over tightening
could cause system damage.
|
- Replace
protective outer cover and turn power source back on.
|